KingPo Technology Development Limited
IEC Testing Equipment
Add to Cart
Battery Burning Tester
Product Type:KP-8105
Test Method:
Put the mesh screen above the burner at a distance of 38.1mm.The mesh screen has 20 holes distributed per 25.4mmDiameter steel wire is 0.43mm.Light the burner and observe the circumstance until explosion and burnout.Time burning procedure out.
Aim:burning resistance
Standard basis:
SJ/T11169-1998 UL 1642:2004(2008)),SJ/T11170-1998,UL 2054:2005(2008)),etc
Specification:
1. Burner:Bunsen burner with internal diameter 9.5mm and approximate length 100mm
2. Burning time:0~ 999.9s±0.1s
3. Hole surface diameter:102mm
4. Mesh screen:20-hole,weaved by 0.43mm(0.017inch) stainless steel wire.
5. Light control:remote wire control with automatic control of process
6. Wire control distance:10 meters without barrier;
7. Height:38mm
8. Tested octagonal mesh screen width:24″(610mm),octagonal,easy to replace and dis-
assemble;Height:12″(305mm)
9. material:aluminum,weaved by aluminum at a diameter of 0.010inch (0.25mm) with 16-18 lattices per inch.
10. Protective chamber:stainless steel.one side of toughened glass with thickness of 50m.Exhaust fan and a reserved outlet for external ventilation kort nozzle
11. Machine volume:750*750*1000mm
Standard Configuration:
1. host machine:1 set
2. controller:1 set
3. octagonal mesh screen(installed):1 set4.test mesh:1 pcs
5. test mesh screen:1 pcs
6. instruction:1
7 .warranty ward:1
8. Product Certificate:1