KingPo Technology Development Limited
IEC Testing Equipment
Add to Cart
Flexible Cable Testing Equipment Flexing Test Apparatus 0 - 50A Adjustable
Product information:
This cable tester is designed and manufactured in accordance with the standard requirement of IEC60245.2 clause 22.7. It is used for checking mechanical strength of completed flexible cables.
This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The carrier C supports two pulleys A and B, which are of the same diameter. The two fixed pulleys, at either end of the apparatus, may be of a different diameter from pulleys A and B, but all four pulleys shall be so arranged that the sample is horizontal between them. The carrier makes cycles (forward and backward movements) over a distance of 1 m at an approximately constant speed of 0,33m/s between each reversal of the direction of movement.
Technical parameters:
|
Load Current (Built-in load) |
2~40A, adjustable |
|
Load Voltage (Built-in load) |
Maximum 12V |
| Test Speed | 0-0.4m/s adjustable |
| Weights Mass | Tow set of 0.5-14Kg combination weights |
| Testing Distance | 1000±2mm |
| Pulleys Diameter | 60mm,80mm,120mm,160mm,200mm |
| Groove R | 1.5mm, 5mm, 6.5mm, 9mm, 12.5mm, 12.5mm, 13.5mm, 16mm |
| Applicable Wire Diameter | 2~26 mm |
| Conforming To | IEC60245-2 clause 22.7 Figure 1 |