KingPo Technology Development Limited
IEC Testing Equipment
Add to Cart
Balance Car Electric Motor Testing System , DC Motor Loading Test System
Name: Balance car DC motor loading test system
Model: CMT-2010HAZQ
Product introduction:
CMT-2010 HAZQ is a set of conditions for testing the motor of the analog balance car under different load conditions. The test system allows the engineer to set different loading scenarios in the test software, such as user weight, uphill, downhill, etc. The system can be loaded according to the curve set by the user.
Features
1. With manual loading, automatic loading, fixed-point torque test, full test and other functions,
2. Ability to output and save data reports and curve reports. If you need to customize the report form, please provide the corresponding template. If not provided, the report will be output according to our default template.
3. Communication with GPIB port, fast transmission speed, collecting 100 torque speed points per second. Use DSP chip PID adjustment. Easy to adjust
Selection reference
| Controller model | Sampling speed | Available Communication Protocol | Communication Method | Providing Test Software | Features |
| HDC-1010 | 5-10PCS/S | Yes | RS-232 | no | Simple operation, low price, suitable for ordinary production lines
|
| HDC-1010-S | 5-10PCS/S | Yes | RS-232 | Yes | |
| HDC-1020 | 20PCS/S | no | USB2.0 | Yes | Fast collection speed and wide test range, suitable for common production lines and common experiments
|
| HDC-1030 | 25PCS/S | no | USB2.0 | Yes | |
| HDC-1040 | 100PCS/S | no | GPIB/RS232 | Yes | Fast acquisition speed, wide test range and strong anti-interference performance, suitable for production lines and laboratories with high requirements |
| HDC-2010 | 100PCS/S | no | GPIB/RS232 | Yes |
Software introduction
Configuration
| No. | Component | Technical requirements |
| 1 | Dynamometer controller | Dynamometer Controller Speed: Accuracy reaches 0.01% of reading from 10-100000RPM. Communication with GPIB port, fast transmission speed, 100 torque points per second. Can be adjusted by the host computer PID. |
| 2 | Industrial control computer with 19-inch display | Industrial control computer with 19-inch display Inter CPU; 4G or above running memory; 500G or above hard drive ASUS motherboard. |
| 3 | Dynamometer | Natural cooling; torque 1.2KG ~ 6Kg.cm, torque accuracy ± 0.5% FS; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS. The short-term (within 5 minutes) operating power is 1400W and the long-term operating power is 300W. |
| 4 | Dynamometer | Natural cooling; torque 0.6 ~ 3Kg.cm, torque accuracy ± 0.5% FS; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS. The short-term (within 5 minutes) operating power is 1400W and the long-term operating power is 300W. |
| 5 | Dynamometer | Natural cooling; torque 100g ~ 500g.cm, torque accuracy ± 0.5% FS; speed 100 ~ 25000 rpm, speed accuracy ± 0.2% FS. The short-term (within 5 minutes) operating power is 1400W and the long-term operating power is 300W. |
| 6 | Cabinet | L600*W600*H1015 |
| 7 | Signal converter | Connect three dynamometers, manually select the dynamometer you need to use, and the system will automatically convert all signals. |
| 8 | Motor fixture | Fine adjustment up and down |
| 9 | testing software | Chinese interface; with manual loading, automatic loading, fixed-point torque test, full-test test and other functions, can output and save data report and curve report function. If you need to customize the report form, please provide the corresponding template. If not provided, output the report according to our default template. |