KingPo Technology Development Limited
IEC Testing Equipment
Add to Cart
IEC60884-1 Figure 40 Abnormal Heat of Insulating Sleeves of Plug Pins Test Apparatus
1. Product information:
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884 1 figure 40,This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard:
IEC60884-1-figure 40, VDE 0620-Bild 39 .
Technical parameters:
Insulating part A:
Thick 5±0.2mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet
Metal part B:
the length is more than 20 mm, brass, five pieces, can be replaced;
Gap between insulation board and metal parts B: 3 mm, ensuring surrounding cross-ventilation
Distance between thermocouple and the metal parts B: 7 mm;
Bolt hole of Metal parts B: more than 0.1 mm;
Equipped with K-type electric heater, imported high-precision digital-display table
| Length | 20 mm min |
| Material | Brass |
| Quantity | Five pieces |
| Can be replaced | Yes |
